30XWVH Water-to-Water Heat Pumps | Carrier UK
Carrier Air Conditioning provide UK Chillers, Bms System, heating controllers and aircon units

The 30XWHV water-sourced units are the premium solution for commercial and industrial applications where installers, consultants and building owners require maximum quality and optimal performances, especially at part load.

The 30XWHV units are designed to meet current and future requirements in terms of energy efficiency, versatility and compactness. They feature exclusive inverter-driven screw compressors – an evolution of the proven traditional Carrier twin-rotor screw compressor design. Other features include:

  • The new Touch Pilot control
  • Mechanically cleanable flooded heat exchangers
  • Refrigerant R-134a

The 30XWHV range for heating applications. As standard, the unit can provide an evaporator leaving water temperature down to 3.3°C, and when operating as a heat pump, it can deliver up to 50°C on the condenser side.

  • Nine sizes for commercial and industrial applications with nominal heating capacities from 648 to 1932 kW.
  • The units feature exclusive inverter-driven screw compressors – an evolution of the proven traditional Carrier twin-rotor screw compressor design.
  • 30XW-V units are designed for high performance both at full load and at part load with EERs up to 5.5 and ESEERs up to 8.0 (EN14511-3: 2013) and Eurovent energy class ratings A and B.
  • New innovative Touch Pilot smart control for variable-drive screw-compressor units uses an intuitive, user-friendly interface with concise, clear information in a choice of languages.
  • Compliance with IEC61800-3 – class C3.
  • Inverter-driven twin-rotor screw compressors allow precise capacity matching of building load changes and significantly reduce unit power input, especially at part load.
  • Flooded mechanically cleanable heat exchangers.
  • Compact design and simplified electrical and water connections for easy installation.
  • R-134a refrigerant with zero ozone depletion potential.
  • Leak-tight refrigerant circuit; two independent refrigerant circuits from 1000 kW upwards.
  • Minimised operating sound level at part load.
  • Improved electrical performance.
  • Condenser insulation
  • Service valve set
  • Evaporator/condenser pump electrical power/control circuit options
  • Evaporator and/or condenser with one pass
  • 21 bar evaporator and/or condenser
  • Reversed evaporator and/or condenser water connections
  • JBus, BacNet or LON gateways
  • Additional module for communication with BacNet protocol via Ethernet (IP)
  • Condensing temperature limitation
  • Control for low condensing temperature systems
  • Energy Management Module EMM
  • Leak detection
  • Code compliance for Switzerland and Australia
  • Low noise level (-3 dB(A) compared to standard unit)
  • Welded evaporator and/or condenser water connection kit
  • Flanged evaporator and/or condenser water connection kit
  • Thermal compressor insulation
  • EMC classification according to IEC 61800-3 – class C2
  • Master/slave operation
  • Single power connection point (1150-1710)

Enquire About This Product

Overseas Enquiries please visit carrier.com

Carrier is a part of UTC Climate, Controls & Security, a unit of United Technologies Corp.
© Carrier Corporation 2020

Website Managed by Progression