30XWH (317-1989kW) Water-to-Water Heat Pumps | Carrier UK
Carrier Air Conditioning provide UK Chillers, Bms System, heating controllers and aircon units

The 30XW Aquaforce range is also split into two versions:

  • 30XW for air conditioning and refrigeration applications
  • 30XWH for heating applications

As standard, the unit can provide an evaporator leaving temperature down to 3,3°C (-12°C optional), and when operating as a heat pump, it can deliver up to 50°C (63°C optional) on the condenser side

  • Twenty standard-efficiency sizes with nominal cooling capacities from 273 to 1732 kW and nominal heating capacities from 317 to 1969 kW and eleven high-efficiency sizes with nominal cooling capacities from 509 to 1756 kW and nominal heating capacities from 584 to 1989 kW.
  • The premium solution for industrial and commercial applications that require optimal performances and maximum quality.
  • Two versions: 30XW for air conditioning and refrigeration applications (see separate entry), and 30XWH for heating applications.
  • Two efficiency classes: the standard-efficiency 30XWH offers an optimised balance of technical and economical aspects and superior energy efficiency, whilst the high-efficiency 30XWHP offers unequalled energy efficiency at minimised operating cost.
  • Twin-rotor screw compressors with high-efficiency motor and a variable capacity valve for exact matching of the cooling capacity to the load.
  • Use of R-134a refrigerant with zero ozone depletion potential.
  • Pro-Dialog control system.
  • Flooded mechanically cleanable heat exchangers.
  • Exceptional full and part load energy efficiency.
  • Economizer system with electronic expansion device for increased cooling capacity (30XWHP).
  • Simplified electrical connections.
  • Units are run-tested before shipment and include a quick-test function for fast commissioning.
  • Leak-tight refrigerant circuit.
  • Comprehensive endurance tests.
  • Aquaforce offers multiple remote control, monitoring and diagnostic possibilities.
  • Medium and low temperature applications
  • Unit supplied in two assembled parts
  • No disconnect switch, but with short-circuit protection
  • Single power connection point
  • Evaporator/condenser pump electrical power/control circuit options
  • Service valve set
  • Evaporator/condenser arrangement with one pass
  • Condenser insulation
  • 21 bar evaporator and condenser
  • Reversed evaporator water connections
  • JBus, BacNet and LON gateways
  • Various condensing temperature options
  • Energy Management Module EMM
  • Code compliance for Switzerland and Australia
  • Master/slave operation
  • Touch Screen interface
  • Low noise level (-3 dB(A) compared to standard unit)
  • Thermal compressor insulation
  • Water connection kit for welded or flanged evaporator/condenser connections
Share:Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedInEmail this to someone

Enquire About This Product

Carrier is a part of UTC Climate, Controls & Security, a unit of United Technologies Corp.
© Carrier Corporation 2017

Designed and Built by Piranha