30XW-V (587-1741kW) Water-Cooled Chillers | Carrier UK
Carrier Air Conditioning provide UK Chillers, Bms System, heating controllers and aircon units

The 30XW-V water-sourced units are the premium solution for commercial and industrial applications where installers, consultants and building owners require maximum quality and optimal performances, especially at part load.

The 30XW-V units are designed to meet current and future requirements in terms of energy efficiency, versatility and compactness. They feature exclusive inverter-driven screw compressors – an evolution of the proven traditional Carrier twin-rotor screw compressor design.

Other features include:

  • The new Touch Pilot control
  • Mechanically cleanable flooded heat exchangers
  • Refrigerant R-134a

The 30XW-V/30XWHV range is split into two versions:

  • 30XW-V for air conditioning applications
  • 30XWHV for heating applications

As standard, the unit can provide an evaporator leaving water temperature down to 3.3°C.

  • Nine sizes for commercial and industrial applications with nominal cooling capacities from 587 to 1741 kW.
  • The units feature exclusive inverter-driven screw compressors – an evolution of the proven traditional Carrier twin-rotor screw compressor design.
  • 30XW-V units are designed for high performance both at full load and at part load with EERs up to 5.5 and ESEERs up to 8.0 (EN14511-3: 2013) and Eurovent energy class ratings A and B.
  • New innovative Touch Pilot smart control for variable-drive screw-compressor units uses an intuitive, user-friendly interface with concise, clear information in a choice of languages.
  • Compliance with IEC61800-3 – class C3.
  • Inverter-driven twin-rotor screw compressors allow precise capacity matching of building load changes and significantly reduce unit power input, especially at part load.
  • Flooded mechanically cleanable heat exchangers.
  • Compact design and simplified electrical and water connections for easy installation.
  • R-134a refrigerant with zero ozone depletion potential.
  • Leak-tight refrigerant circuit; two independent refrigerant circuits from 1000 kW upwards.
  • Minimised operating sound level at part load.
  • Improved electrical performance.
  • Condenser insulation
  • Service valve set
  • Evaporator/condenser pump electrical power/control circuit options
  • Evaporator and/or condenser with one pass
  • 21 bar evaporator and/or condenser
  • Reversed evaporator and/or condenser water connections
  • JBus, BacNet or LON gateways
  • Additional module for communication with BacNet protocol via Ethernet (IP)
  • Condensing temperature limitation
  • Control for low condensing temperature systems
  • Energy Management Module EMM
  • Leak detection
  • Code compliance for Switzerland and Australia
  • Low noise level (-3 dB(A) compared to standard unit)
  • Welded evaporator and/or condenser water connection kit
  • Flanged evaporator and/or condenser water connection kit
  • Thermal compressor insulation
  • EMC classification according to IEC 61800-3 – class C2
  • Master/slave operation
  • Single power connection point (1150-1710)
Share:Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedInEmail this to someone

Enquire About This Product

Carrier is a part of UTC Climate, Controls & Security, a unit of United Technologies Corp.
© Carrier Corporation 2017

Designed and Built by Piranha