Brief Description:
The 42WH High-Wall unit is available in three sizes as a two-pipe, or two-pipe plus electric heater. These units deliver air flow ranges from 47 to 131 l/s, nominal cooling capacities from 0.9 to 2.1 kW and heating capacities from 1.2 to 3.2 kW.
- Three sizes as a two-pipe or two-pipe plus electric heater system, with an air flow range from 47 to 131 l/s nominal cooling capacities from 0.9 to 2.1 kW and nominal heating capacities from 1.2 to 3.2 kW.
- Aesthetically designed high-wall chilled-water fan coil system.
- Reliable and economical cooling and heating for hotels, light commercial and residential applications.
- Available with a back panel.
- Tangential fan for low sound levels.
- Safe factory-mounted electric heater for single or dual-stage hot water heating.
- Low hydraulic pressure drop with a valve mounted, compatible with all chiller pump kits.
- Quick installation with factory-mounted options.
-
Options and Accessories:
- Fully featured back panel
- Factory-mounted three-way valve
-
Standard Controls:
Electronic thermostat
- Two versions, A and B, with potentiometer
- Automatic or manual three-speed selection
- Automatic or manual change-over
- Electric heat control
- Comfort/economy/frost protection modes
Use the link below to view ALL the literature for 42WH High-Wall Units
View available literature for 42WHC/WHE on Carrier pdf hub
The information on this page is subject to change without notice.
back to top