Brief Description:
Air-Cooled 09GDV dry coolers and 09LDV condensers are designed for commercial and industrial cooling installations. Due to its construction, the range is especially suitable when high capacity relative to the available space, low energy consumption or low noise levels are required.
- 15 sizes with nominal capacities from 140 to 1442 kW for liquid use, and with nominal capacities from 170 to 1812 kW for condenser use (condenser capacity R404A/T 15K).
- The 09GDV dry coolers and 09LDV air-cooled condensers are designed for commercial and industrial refrigeration plants.
- The range is especially suitable when high capacity compared to available space, low noise level and low energy consumption are required.
- Two fan sizes and five fan speed alternatives to reach the required sound level. The axial fans are equipped with squirrel-cage motors, built according to IEC standards with the IP54 protection and insulation class F. Motors are provided with shaft seals and drainage holes.
- Casing made of hot-dip galvanized steel.
- Complete fan control systems available, based on fan speed regulation (SVC) or on stepwise starting cycle of fans (step control).
- Product selection using the Polar Power software performance data according to Eurovent rating standards 7/C/002/1999 and 7/C/003/1999.
- The heat transfer section is made of copper tubes and aluminium fins, which cover the tubes totally. Fin spacing is 2.3 mm.
- The heat transfer section can be multi-circuited or equipped with a sub-cooling circuit.
- The fan chambers are separated laterally.
- The units are equipped with lifting lugs, and the smaller models are suitable for lifting by a forkliftIR-C
- Epoxy-coated aluminium fins available to extend the working life of the coil in urban and coastal climates.
- Water-spraying system to increase the heat transfer capacity during short loading peaks.
- Vibration dampers.
- Star/delta connection
The information on this page is subject to change without notice.
back to top